Standard Rifles
AR-15 / M4A1

Bitchin Betty 1.0

Bitchin Betty 1.0

Model Description

“Named after the warning system used in Miliary Aircraft for warning a pilot, B*tchin' Betty should set off the warning siren for anyone that has it. She is one bad babe.“

Bitchin' Betty is named after the pilots' nickname for a military fighter jets voice warning system. Military aircraft used voice warning systems as far back as the 1960's, in the B-58 Hustler. Back then crewmen referred to this system as “Sexy Sally” and it was voiced by actress and singer Joan Elms, at that time the voice was recorded to magnetic tape. When the F-15 came around it was voice by actress Kim Crow, and the system became known as Bitchin' Betty. General Dynamics used the voice of Erica Lane in their F-16 fighter. Boeing's own Leslie Shook had the honors of voicing the F/A-18's version. Apparently, she wasn't even their original choice, she was trying to coach someone else on how it should sound, and they asked her to start recording. A Navy lieutenant commander understood it was clear that Shook was the voice they were looking for, so he took over the job as recording engineer so that she could record her voice, Shook said. Later, Boeing decided to make Shook the voice for all of the other audio warnings.

One of the first ever limited-edition models released by GoatGuns, this model came with the same parts you would get with Charky, but instead of being completely black, the stock, receiver, rear iron sight, and quad-rail handguard have received a hydro dipped pink carbon fiber paint job. The smaller parts like the delta ring, take down pins, dust cover, magazine, magazine release, bolt catch, Bolt, charging handle, elevation and windage knobs, grip, buffer tube, stock pin, and rear sling attachment point are still black.

The Pink Carbon Fiber AR-15/M4A1 Bitchin Betty 1.0


Released:
Late October 2017
End date:
~ May 2019

Produced:
1,000


Photos of the AR-15/M4A1 Model Bitchin Betty 1.0

The pink carbon fiber AR-15 model The pink carbon fiber AR-15 model The pink carbon fiber AR-15 model The pink carbon fiber AR-15 model The pink carbon fiber AR-15 model The pink carbon fiber AR-15 model The pink carbon fiber AR-15 model The pink carbon fiber AR-15 model The pink carbon fiber AR-15 model The pink carbon fiber AR-15 model The pink carbon fiber AR-15 model The pink carbon fiber AR-15 model The pink carbon fiber AR-15 model The pink carbon fiber AR-15 model

What's in the Box?

Specifications


Dimensions:

-measurments determined from similar model with same parts.
Length (No Suppressor - Stock Compressed):
9.90" - 25.14cm
Length (No Suppressor - Stock Extended)
10.98" - 28.89cm
Length (w/ Suppressor - Stock Compressed)
11.27" - 28.62cm
Length (w/ Suppressor - Stock Extended):
12.35" - 31.36cm
Width (Gun Only):
0.88" - 22.45cm
Width (Stand):
1.44" - 3.6cm
Height (Gun Only):
3.45" - 8.76cm
Height (On Stand)
4.29" - 10.89cm
Weight (Gun Only - No Suppressor):
8.3oz - 238g
Weight (Gun Only - w/ Suppressor)
8.6oz - 246g
Weight (On Stand - No Suppressor):
10.3oz - 293g
Weight (On Stand - w/ Suppressor)
10.6oz - 301g

Scaling by Raymond Bernatchez

Real Firearm Size:
756mm
Model Size:
253mm
Ratio According to GoatGuns:
1:3
True Ratio:
1:2.98
Size Percentage:
33.46%

Compatible Parts

Model as Sold:

Resources